2017-06-11 Creating circuits at Maker Faire Paris 2017 with Thingz Electronics

 
Here is one of the circuits I created today:
I put a LED and a button on a board (connected via USB to a computer) and then programmed on the Thingz electronics graphical interface https://www.thingz.co/store/create
(they say it is C++) this IF function (as shown in the image):
If the button is pressed, LED lights for 1 second.
 
Thingz electronics: Create circuits using bricks like LEGOs - teaching kids how to program. Applications that have been created are here: https://www.thingz.co/store
 
 

 

 

Moving detector and buzzer circuit (alarm circuit)
 
Here is the second circuit I created today. I put a motion detector and a buzzer on a board (connected via USB to a computer) and then programmed on the Thingz electronics graphical interface this IF function:
If the movement detector detects a continuation* of a movement, the buzzer sounds at 440 Hz.
 
*another option: initiation
 

 

 

 

Demonstration of a LED-button-digit display circuit by Thingz electronics
 
Two LED, a button and a digit display are placed on a board (connected via USB to a computer). The following IF function is programmed on the Thingz graphical interface https://www.thingz.co/store/create:
 
If button is pressed, LED 1 lights up, LED 2 lights up and digit display shows number 0.

 

 

 

 

 

#Circuit bouton-LED créé avec @wemakethingz sur https://www.thingz.co/store/create  "Si bouton appuyé, allumer LED pour 1 sec” @MakerFaireParis

https://twitter.com/infobookcom/status/874230413165723648

 

Circuit détecteur mouvement & buzzer (alarme) par @wemakethingz https://www.thingz.co/store/create "Si détecteur détecte mouvement, buzzer sonne 440Hz”

https://twitter.com/infobookcom/status/874232229433626624

 

Circuit bouton-LEDs-afficheur chiffre @wemakethingz https://www.thingz.co/store/create. "Si bouton appuyé, LEDs allument, afficheur affiche chiffre 0"

https://twitter.com/infobookcom/status/874233523019886594